A friend of mine has recently had a little baby girl, so I was able to make another ribbon tag blankie. I thought it would be lovely to share the process with you, as its a quick gift that isn't boy or girl specific and different to all the babygrows new parents usually recieve.
I first made a tag blankie when my niece M was born. Now she is 8 months old it has provided endless hours of fascination for her; either rubbing the soft blankie on her face or 'tasting' all the different ribbon textures.
I followed a pattern from Lotta Jansdotter's simple sewing for baby book, adapting the instructions as I go, as reading every instruction carefully is not one of my talents, I much prefer to jump in and see how it turns out!
I like to use minky for the blankie material rather than cotton, plain minky for one side and a dimple minky for the opposite side, to give baby some lovely textures to enjoy touching.
I know white is probably not the practical choice for a new born baby, but I love the contrast of colours. It’s machine washable, so any mess can quickly be cleaned.
I selected lots of colourful ribbons in a variety of textures; velvet, grosgrain, satin, woven stripes and polka dot. I also found a use for a free gift from Mollie Makes magazine; cotton twill tape stamped with 'Handmade with love'.
I use inches as this is a very simple guide for me to use on my cutting mat, making gliding through with the rotary cutter a simple task.
· 0.5m of plain minky
· 0.5m of dimple minky
· 0.5m Lengths of different ribbons
· coordinating cotton
1. Cut your minky to 13" squares (~33cm) using a cutting mat, rotary cutter and ruler.
2. Cut your ribbons into a range of lengths between 3" and 5.5", making sure you have 4 lengths of each colour. Any larger than 6" and I have found baby can get their hands caught in the loops.
3. Lay one square of minky right side up, take a length of ribbon and fold in half wrong sides together. Starting at the top left corner begin pinning the lengths of ribbon along the edge of the minky, matching the raw edges of minky and ribbons. I decided to follow a rainbow sequence when pinning my ribbons in an order, however you can be totally random. Try to select contrasting lengths of ribbons next to each other to create interest.
4. After pinning all the ribbons along all edges of the minky, sew 1/4" along all sides to secure the ribbons into position. Then remove all pins.
5. Lay the remaining minky square on top of the ribbons and minky you have just sewn, right sides together creating a ribbon sandwich. Ensure all ribbons are enclosed in the sandwich.
6. Sew a 1/2" along all 4 edges, leaving a gap of 3" on the centre of one side to allow you to pull all the fabric through.
7. Trim all edges so there is 1/4" hem to reduce the bulk. Leave the 3" gap will full seam allowance.
8. Turn the blankie the inside out through the 3" gap, so the right sides of the minky are on the outside, with the ribbons popping up along all the edges.
9. Press the ribbons and edges of minky, folding the seam allowance of the 3" gap inwards and pinning into position.
10. Sew along each edge, as close to the edge as possible so that you secure all the ribbon ends in the seam.
11. You can then sew an additional row of stitching 1/4" from the edge to add some interest and secure the minky layers together… Extra reinforcement.
Here is my finished tag blankie along with a soft rattle toy I made using another pattern from Lotta Jansdotter's book, Simple Sewing for baby.
This is a great book for any crafty mum to be, or if you are looking for some new ideas for handmade baby gifts. It contains instructions and patterns for 24 simple projects, so you do not need to be a very experienced sewer. The simplicity of the patterns allows you to be creative with your fabric selections to create something baby, and hopefully the new parents, will love for years to come.
Let me know if you try to make a tag blankie, I would love to see your creations. If you have any questions along the way then get in touch and I’d like to try and help you.
Thank you xxx